Customer Setup Software

We have developed two versions of our software for easy configuration of our TFT controller boards depending on which chipset is being used. MarsRover and Chandler Rover.

This allows our system integrator partners to have flexibility in programming the boards to their own settings, it enables the programming of the boards for displays we do not support, and allows for base board stocking.

The sofwtare is MS windows based, and has been designed to be user friendly simply by inserting the correct parameters from the panel spec into the appropriate sections pof the software and board flashing through a serial port.

Configuration Software (large)

For more information on our Configuration Software please contact us today on 01480 411600 to see how we can help you find the perfect display solution.

Board features

  • LVDS timing (with spread spectrum for increased EMI performance)
  • Power Sequencing (T-CON, BLU, PSU remote signal on screw terminal)
  • T-CON supply voltage is configurable for 3.3V / 5.0V or 12V
  • Backlight unit (BLU) control (ANA/PWM, 3.3V/5V min/max, with pixel dimming)
  • Adjustable LVDS option pins (e.g. for reverse scan, JEIDA/VESA mapping, H/L, 3.3V or 5V level)
  • Configuration can be saved as XML file for future use
  • OSD setup and user data can be saved and re-used
  • Firmware and EDID can be updated easily
  • Operation hour counter (analyzable separately for display and backlight)
  • The user can chose the active input interfaces (for shorter switching periods when searching for an input source)

New MarsRover Software Features

Panel Configuration

  • LVDS channel swap

Board Configuration

  • Enable SOG (Sync On Green) on VGA port
  • 4-/6-Button Keypad selection
  • 2 custom modes for special timings can be defined


If you have any questions about our product range, or wish to speak to a member of our team about your requirements. Please contact us using this form, or via our Contact Us page.

© Fortec United Kingdom

View Saved Products